With the new Autopilot EVOLUTION from Raymarine, steering of your boat becomes easier than before. difficult calibration is no longer necessary. Due to the intelligent EV-sensor, the autopilot monitors multiple ship movements in all directions and automatically adjusts the steering to match existing sea conditions, without the user having to adjust any other settings. Safe arrival at the planned destination is guaranteed. A further big advantage of the autopilot is flexibility of installation. The device itself can be installed where it is easiest for you to access, while the EV-sensor can be mounted where it makes most sense to you, no matter if above or below deck. There are no restrictions concerning the installation compared to common heading sensors.The core of the sensor is water-protected to IPx6 and IPx7. You can connect the different components very easily via SeaTalk. The required cables and rudder reference unit are included. Furthermore, the autopilot is NMEA2000 compatible.
This set includes the Sensor EV-1, the drive controlling unit ACU-1, operational device p70R (ideal for motor boats), a hydraulic pump type 200 as well as the Evolution cable set.
Sensor EV-1
The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. The SeaTalkng network enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.
ACU-200 Drive Control Unit
The robust ACU-200 provides reliable power for the drive of the autopilot and can provide the SeaTalkng bus with power. The ACU-200 can steer drives of type 1. With rudder reference transducer.
Operational device p70Rs
The p70R control unit has a combination of function keys and rotary knob and is therefore particularly suitable for motor yachts. The sophisticated LED backlight delivers brilliant colours and contrasts with low power consumption. The large horizontal and vertical viewing angle enables reading from almost any viewing direction. The p70R uses the LightHouse user interface.
Type 1 hydraulic pump
This hydraulic pump moves the steering of your boat as part of the Raymarine autopilot system. The pump was primarily developed for use in existing hydraulic systems. As an alternative, it can be used on boats with mechanical steering with an additional cylinder. The hydraulic pump contains a precision gear pump and a check valve driven by a servo motor. Suitable for hydraulic cylinders with a volume of 80cc - 230cc.
Evolution cable set:
- 1 x SeaTalkng Power Cable
- 1 x SeaTalkNG backbone cable (5 m)
- 1 x SeaTalkng drop cable (0.4 m)
- 1x SeaTalkng 5-way-distributor
- 2x SeaTalkng T-piece
- 2x SeaTalkng Terminator
Technical data - Type 1 hydraulic pump
| Power supply |
12 V |
| For cylinder volume |
80 - 230 ccm
(4.9 - 14.0 in3) |
Maximum flow rate
(no load) |
1000 ccm/min
(61.0 in3/min) |
| Dimensions (h x w x d) |
199 x 103 x 89 mm |
Technical data - EV-1 sensor
| Nominal on-board voltage |
12 V (power supply via SeaTalkng) |
| Operating voltage range |
10.8 to 15.6 V DC |
| Power consumption (amps) |
30 mA |
| Sensors |
Three-axis digital accelerometer,
Three-axis digital compass and
three-axis digital angular rate sensor |
| Data connection |
SeaTalkng |
| Operating temperature |
-20 to +55 °C |
| Storage temperature |
-30 to +70° C |
| Relative humidity |
max. 93% |
| Water rating |
IPX6 |
| Diameter |
140 mm |
| Depth |
35 mm (including housing)
95 mm (including bracket) |
| Weight |
0.29 kg |
Technical data - p70Rs control unit
| Nominal voltage |
12 V DC |
| Voltage range |
9 to 16 V DC |
| Display Size |
3.5" |
| Display |
Optically integrated, sunlight-readable LCD display |
| Resolution |
320 x 240 QVGA |
| Colours |
16 bit colour resolution (64,000 colours) |
| Colour palettes |
Four colour palettes - two day, inverse and red/black |
| LCD brightness |
1;200 nit |
| current consumption (watts) |
1:6 watts |
| Connectors |
SeaTalk and SeaTalkng compatible with NMEA2000 marine networks |
| Operating temperature |
-25º C to 55º C (-13º F to 131º F) |
| Storage temperature |
-30º C to 70º C (-22º F to 158 ºF) |
| Relative humidity |
Maximum 93 % |
| Waterproof to |
IPX6 |
| Compliance |
Europe: 2004/108/EC | Australia and New Zealand: C-Tick Compliance Level 2 |
| Included in delivery |
Instructions, seal, display, sun cover, replacement frame, mounting screws |